Smart toy’s localization and obstacle avoidanceīased on white objects with 70% reflectivity.
General simultaneous localization and mapping (SLAM).
Home service /clean robot navigation and localization.
Service robot or industrial robot working for long hours.
Environment scanning and 3D re-modeling.
General robot navigation and localization.
The RPLIDAR can be used in the following application scenarios: The modulated laser can effectively avoid the interference from ambient light and sunlight during ranging scanning process, which makes RPLIDAR work excellent in all kinds of indoor environment and outdoor environment without sunlight. The laser emits light in a very short time frame which can ensure its safety to human and pet, and it reaches Class I laser safety standard. The RPLIDAR A2 system uses a low power infrared laser as its light source, and drives it by usting modulated pulse. When drove by the motor system, the range scanner core will rotate clockwise and perform the 360-degree scan for the current environment. The returning signal is then sampled by vision acquisition system in RPLIDAR and the DSP embedded in RPLIDAR starts processing the sample data and outputs distance value and angle value between object and RPLIDAR via communication interface. The system ranges more than 4000 times per second.ĭuring every ranging process, the RPLIDAR emits modulated infrared laser signal and the laser signal is then reflected by the object to be detected. The RPLIDAR A2 is based on laser triangulation ranging principle and adopts the high-speed vision acquisition and processing hardware developed by SLAMTEC. The detailed specification about power and communication interface can be found in the following sections. If the actual speed of the RPLIDAR is required, the host system can get the related data via communication interface. In this way, the simple power supply schema saves the BOM cost. And there is no need to provide complicated power system for RPLIDAR. The system will adjust the angular resolution automatically according to the actual rotating speed. The RPLIDAR A2 comes with a rotation speed detection and adaptive system. And users can get the range scan data via the communication interface of the RPLIDAR and control the start, stop and rotating speed of the rotate motor via PWM. When it functions normally, the scanner will rotate and scan clockwise. The RPLIDAR A2 consists of a range scanner core and the mechanical powering part which makes the core rotate at a high speed. Meanwhile, before leaving the factory, every RPLIDAR A2 has passed the strict testing to ensure the laser output power meet the standards of FDA Class I. The RPLIDAR A2 adopts the low cost laser triangulation measurement system developed by SLAMTEC, which makes the RPLIDAR A2 has excellent performance in all kinds of indoor environment and outdoor environment without direct sunlight exposure. And the actual scanning frequency can be freely adjusted within the 5-15hz range according to the requirements of users. Under this condition, the resolution will be 0.9°. The typical scanning frequency of the RPLIDAR A2 is 10hz (600rpm). The generated 2D point cloud data can be used in mapping, localization and object/environment modeling. The system can perform 2D 360-degree scan within a 6-meter range. And equipped with SLAMTEC patented OPTMAG technology, it breakouts the life limitation of traditional LIDAR system so as to work stably for a long time. It can take up to 4000 samples of laser ranging per second with high rotation speed. The RPLIDAR A2 is the next generation low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC.
0 kommentar(er)
